Truck “Tell-Tale” Truck Collision and Rollover Sensor

NEW Version of Sensor Used in FAA-Required Emergency Systems for Over 35 Years. Detects Collisions Detects Rollover Designed to Prevent Nuisance Trips.

Aerodyne Controls "Tell-Tale" Sensors Are Used In Emergency Locator Transmitters and "Black Box" Recorder Systems in Commercial Aircraft.

Rollover Angle and Impact Setpoint Can Be Customized For Different Equipment	Compact Enclosure
Typical Specifications (others available upon request) Impact Sensor Switch is hermetically sealed. Contacts remain open below 9.0 g along the sensitive axis. Contacts shall close (momentary) when subjected to an 11.0 g half-sine shock of 0.050 seconds duration along its sensitive axis. Closed contact resistance shall be 10 ohms or less at 0.10 amps. Rollover Sensor Switch is hermetically sealed. Contacts shall remain open with respect to the vertical axis at tilt angles less than 85 degrees. Contacts shall close with respect to the vertical axis at angles greater than 90 degrees.

<<Back

1-888-778-0300
Phone: (631)737-1900• Fax: (631)737-1912
30 Haynes Court • Ronkonkoma, NY 11779
E-mail sales@aerodyne-controls.com